LARGE 10 by 12 Inch SAPI (Small Arms Protective Insert), to work "IN CONJUNCTION" with your 3A bulletproof vest (Interceptor, Blackhawk, ABA, etc.), and will upgrade it to PROTECTION LEVEL 3 to defeat Rifle-Fire and/or multiple hits of:

• 7.62 mm NATO USM.BALL M80 150 grains projectile @ 2750 ft/sec
• 5.56 mm NATO USM.BALL M855 62 grains projectile @ 3050 ft/sec
• 5.56 mm NATO USM.BALL M193 55 grains projectile @ 3250 ft/sec
• .223 , 7.62 x 39 AK, .308, 7,62 x 51
• ULTRA LIGHT LEVEL 3 PLATES are made of 100% High-Density Polyethylene (HDP) AKA "Spectra" "Dyneema" or "Famastone" (registered brand-names) and are INCREDIBLY LIGHT!
• Only 3.3 Lbs (1.5 Kg) each, will work with ANY bulletproof vest (ABA, Interceptor, Blackhawk, etc.) that has front and/or back 10 by 12 inch sized pockets; plate carrier harness is available, if you have no upgrade pockets on your vest.
• PLATES ARE BRAND NEW & FACTORY SEALED 10 by 12 Inch sized, 3.3 Lbs. (1.5 Kg) EACH
• Made in Israel by "Achidatex" & "Export-Erez" - certified contractors to the IDF.
• MEET AND EXCEED INTERNATIONAL STANDARDS: NATIONAL INSTITUTE OF JUSTICE U.S.A, NIJ STANDARD 0101-04 U.S.A, NIJ STANDARD 0101-03
  

Large SAPI (Small Arms Protective Insert) to work "IN CONJUNCTION" with your 3A bulletproof vest (Interceptor, Blackhawk, ABA, etc.), and will upgrade it to PROTECTION LEVEL 3 to defeat multiple hits of:

• 7.62 mm NATO USM.BALL M80 150 grains projectile @ 2750 ft/sec
• 5.56 mm NATO USM.BALL M855 62 grains projectile @ 3050 ft/sec
• 5.56 mm NATO USM.BALL M193 55 grains projectile @ 3250 ft/sec
• .223, 7.62 x 39 AK, .308, 7.62 x 51
• Plates are curved for maximum comfort, and will work with any bulletproof vest that has front and/or back 10 by 12 inch sized pockets.
• Each plate is: 10 by 12 Inch, by 0.6" thick, 5.5 Lbs. (2.5 Kg) Plates are NEW & Factory sealed,
• Made in Israel by "Achidatex" & "Export-Erez" certified contractors to the IDF.
• These plates are made of Monolithic Ceramic,
• MEET AND EXCEED INTERNATIONAL STANDARDS: NATIONAL INSTITUTE OF JUSTICE U.S.A, NIJ STANDARD 0101-04 U.S.A, NIJ STANDARD 0101-03

Large SAPI (Small Arms Protective Insert) to work "IN CONJUNCTION" with your 3A bulletproof vest (Interceptor, Blackhawk, ABA etc.), and will upgrade it to PROTECTION LEVEL 4 to defeat Armor Piercing 7.62 NATO USM AP rounds, and or multiple hits of:

• 7.62mm NATO USM.BALL M80 150 grains projectile @ 2750 ft/sec
• 5.56mm NATO USM.BALL M855 62 grains projectile @ 3050 ft/sec
• 5.56mm NATO USM.BALL M193 55 grains projectile @ 3250 ft/sec
• 7.62 x 39 AP, 7.62 x51 AP, 7.62 x 54R(Druganov), .30-06 AP M2, .223 AP SS-109
• Plates are good for use with any bulletproof vest that has front and/or back 10 by 12 inch sized pockets.
  • Each plate is: 10 by 12 Inch, by 0.75" thick, 7.05 Lbs. (3.2 Kg)
• Factory new & sealed, made in Israel by "Achidatex" & "Export-Erez" certified contractors to the IDF.
• These plates are made of Monolithic CERAMIC, MEET AND EXCEED INTERNATIONAL STANDARDS:
  NATIONAL INSTITUTE OF JUSTICE
  U.S.A, NIJ STANDARD 0101-04
  U.S.A, NIJ STANDARD 0101-03

FREE WITH PURCHASE OF PLATE SET

Condor MOLLE System Plate Carrier Harness

A heavy-duty hook & loop flap on both the front and back of this harness open to insert up to 10x12-in ballistic plates.
MOLLE webbing over the entire harness for modular pouch attachment, reinforced heavy-duty drag handle, and our patented back panels for increased air flow/ventilation between you and the carrier makes this one of our most popular MOLLE carriers.

Colors:
Black
Tan / Coyote
Olive
Wt: 2.10 lbs

Fits 39" to 55" girth

FREE WITH PURCHASE OF PLATE SET

Level 3 Steel Plates Low Profile W/ Anti Spalling Coating and Modular Plate Carrier.

• Great Value for the Special Operator on a Budget.
• Hand Made in U.S.A. by D and D (Certified Government Contractor)
• Advantages- Multiple Hit capabilities-Low profile
• As with All steel plates there is a chance of Spalling or bullet fragmentation.
• Buyer Assumes risk that could be associated with the use of Steel plates.
  

Level 3 Low profile Rifle Plates with Anti Spalling Coating.

• Made By D and D industries USA
• 2 Plate set ONLY- NO carrier included.
• Great Value for the Special Operator on a Budget
• Advantages- Multiple Hit capabilities-low profile
• As with All steel plates there is a chance of Spalling or bullet fragmentation.
• Buyer Assumes risk that could be associated with use of Steel plates.
• NO Condor Carrier is Included
  

Rating- Bulletproof 3A/Stab Level 2 NIJ

Brand-new Stab-proof and Bullet-proof body armor, especially designed for VIP's, security and/or police officers.

To be worn above or under clothes. Adjustable with velcro at 6 different points, comfortable and lightweight (~7.9 lbs. 3.6k)

Brand-new, It will fit those who are 5'8" to 5'11" and average weight.

• Cordura made carry hand-bag is included with this vest, so it can be used as a protective blanket when vest is inside. It is the best way to discreetly carry your vest when you're not wearing it.
• Vest comes ready to go with level IIIA (3A) ballistic panels to defeat multiple hits of:
• 9mm FMJ 124 grains projectile @ 1400 ft/sec
• .44 Magnum 240 grains projectile @ 1400 ft/sec
• 9mm SMG Silver-Tip HP 115 grains projectile @ 1400 ft/sec and/or lesser threats per NIJ rules.
• Stab-Proof up to 35 Joules which equals to level II per NIJ

Made in Israel, manufactured "Marom-Dolphin" authorized contractor to the Israeli army.